Blueson A1 8S 70A 4in1 ESC, Pre-Flashed for Drive and Weapon!

Minimal Wiring with Maximum Performance

The Sequre Blueson A1 ESCs have been used by high-performance racing quadcopters for years, and recently began getting adopted by combat robot builders. The key pain point with 4in1 ESCs for combat, however, is that they can be very annoying to wire to a receiver, reprogram, and use without a flight controller. Well, those pain points have been solved!

first off, this ESc comes preflashed with bidirectional drive settings (perfect for Blitz Lite 2850kv motors) on chanels 1 and 2, and single direction spinner settings (that should work with most if not all our hubmotors) on channels 3 and 4, making it easy to integrate into your robot. At worst just a kv change away from a perfect setup.

Pair with our Blueson A1 Backpack to make wiring to an ER4 or R84 compact and easy, with an integrated LED and BEC to power the receiver with 5V. 

All the settings can be changed with our AM32 USB programmer and our 8-pin breakout boards make connecting the programmer much easier. The breakout board also makes it much easier to wire up any external electronics you so choose, with your own BEC or receiver combo. The M1-M4 channels just need to connect to receiver signal outputs for CH1-4, and the receiver powered independantly (such as with one of our All In One PD boards). 

Specifications:

• Model: Blueson A1
• Processor: AT32F421
• Firmware Version: AM32 V2.20
• Working Voltage: 2-8S Lipo / LiHV
• Continuous Current: 8S 70A
• Peak Current: 8S 150A
• Support Protocol: Dshot600/300/150, Oneshot, Multishot, PWM
• Telemetry Return: YES
• Galvanometer: YES
• BEC: NO
• Mounting Hole Spacing: 20*20mm, Φ4mm/M3
• Product Size: 42.5*36*7mm(L*W*H)
• Product Weight: 19g

Package includes:

SEQURE Blueson A1 4IN1 ESC × 1
30AWG 40mm reverse double plug SH1.0-8P cable × 1
30AWG 60mm single plug SH1.0-8P cable × 1
12AWG 100mm power cable (black/red)×2
XT60H-M black male connector×1
35V 680UF solid capacitor×1
M3*8mm shock absorbing washer (black) × 5     

Overall Dimensions:

(1) Product Size:42.5*36*7mm
      Net Weight Of Product:19g
(2) Package Size: 90*60*35.5mm
      Packing Weight: 63g

Default Settings:

AM32 V2.20, CH1 and CH2 bidirectional, while CH3 and CH4 are single direction. All the settings can be changed with our AM32 USB programmer and our 8-pin breakout boards make connecting the programmer much easier. Click the images for a larger version.