3S 11.1V 800mAh 20C LiPo Battery

Great Quality Battery for Lower Power Bots

This small 3S LiPo is a good size for most beetleweight control bots or 3S spinners without crazy huge current demands. Weighs just 77 grams (2.72 oz) with a tested and verified capacity of at least 800mAh.

WARNING:
LiPo batteries can catch fire if misused. If handled correctly they are perfectly safe to use, but care MUST be taken to avoid a fire hazard.

Run Time

How Much Capacity Do You Really Need?

This is a very hard question to answer. The current rating of motors and ESCs doesn’t give you any real information about continuous power draw. You pretty much have to either use examples for similar bots or measure real-world power draw of your bot with a power meter such as the WM150 we use for internal testing.
 

Specs

Specifications & Test Data

• Voltage: 3S, 11.1V Nominal. Ships at 60% storage charge
• Capacity: 800 milli-Amp hours (mAh), 8.88 Watt-hours (Wh)
  
• Weight: ~77g
• Size: 60.5 x 31 x 22.3 mm
  

SAFETY INFORMATION

1. Charge the battery with a proper LiPo balance charger only.
2. Inspect for damage or puffiness before charging or using. Safely dispose of if there is excessive puffiness or visible damage.
3. Do not short-circuit the battery. This means connecting it directly to itself. Be very careful to inspect your wiring for shorts before connecting the battery.
4. Do not charge any LiPo unattended.
5. Do not charge the battery while it is inside your robot. It’s always safest to charge inside a LiPo Safe bag.
6. Do not overcharge or over-discharge. This battery should be charged to 4.2V/cell (16.8V) and discharged no lower than 3.3V/cell (13.2V).
7. Do not overheat the battery. If your battery seems warm to the touch after a fight, wait for it to cool before charging or using it again.